High-Purity Silica Powder Installation Specifications And Key Technical Points

Sep 16, 2025

Hagyjon üzenetet

High-purity silica powder, a key raw material in electronic packaging, high-end ceramics, and precision materials, requires strict adherence to specific specifications during installation to ensure material performance is not compromised and maintain a safe production environment. The following details the preliminary preparation, installation process, and precautions.

 


Before installation, a comprehensive inspection of the storage environment and equipment is required. High-purity silica powder should be stored in dry, sealed, dedicated containers. The ambient humidity should be controlled at <=40% RH, and the temperature is recommended to be maintained between 10-25℃ to prevent moisture absorption and the incorporation of impurities. The installation area must be equipped with dust-proof facilities (such as a clean room or negative pressure dust removal system). Operators must wear anti-static clothing, masks, and gloves to prevent contamination of the material by body oils and dust. Furthermore, the sealing of conveying pipelines, storage tanks, and metering equipment must be verified in advance to ensure there is no risk of leakage.

 


1.Container Unpacking and Inspection: Handle the original packaging of the silica micropowder with care. After confirming that the outer packaging is intact, unpack it in a clean environment and use a dedicated sampling tool to verify that the particle size distribution and purity meet standards.
2.Pipe Connection and Purging: If installing via a pneumatic conveying system, first back-purge the pipeline with dry nitrogen to remove residual particles. When using a screw feeder or vacuum loader, adjust the speed to 5-15 rpm (depending on the particle size) to avoid static electricity generated by high-speed friction.
3.Feeding and Mixing: When slowly adding silica micropowder to the reactor or mixing equipment, it is recommended to use the "small, multiple additions" principle, using an inert gas blanket (such as argon) to prevent oxidation. Mixing uniformity can be verified by sampling and testing the distribution of key components.

 


During installation, monitor the ambient temperature and humidity in real time. If clumping or moisture absorption is observed, immediately suspend operations and dry the material (temperature <= 120℃, time <= 2 hours). After equipment shutdown, any residual powder must be thoroughly cleaned to prevent cross-contamination. Furthermore, discarded packaging materials must be handled according to hazardous waste regulations to avoid environmental pollution.

 

Standardized installation procedures maximize the physical and chemical stability of high-purity silica powder, providing a reliable material foundation for subsequent process steps.

A szálláslekérdezés elküldése